Basic Concept Of Alcohol Lamp

1. Structure: Alcohol lamps are composed of lamp body, cotton light rope (cotton core), porcelain lamp core, lamp hat and alcohol.

2. Volume: 60ml, 150ml, 250ml and other specifications.

3. Flame: The flames of the alcohol lamps that are used normally should be divided into three parts: flames, internal flames and outer flames. Use external flames to heat when heating. Studies show that the order of the temperature of the flame of the alcohol lamp is: outer flames> internal flames> flame heart. Theoretically, the flame temperature of the alcohol lamp is generally believed to be the highest. Because the flames are fully exposed to the outside atmosphere, the energy exchange with the environment is the easiest to exchange energy during burning.

The existing alcohol lamp mouth is separated from the lamp body. Once the lamp is turned over, it will cause alcohol to flow, which will cause the fire to risk the fire. Safety alcohol lamps, consisting of light caps, cores, hole ceramic lights, alcohol into pores, core tubes, lamp bottles, floating blocks and inner plugs. Even if the lamp bottle is overwhelmed, the lamp bottle is sealed, and the core tube isolates the core from part of the alcohol, and the floating block always holds the tube of the core thin film tube to make it higher than the alcoholic surface height, so even if even The lamp bottle flipped, and the alcohol could not flow from the core hole through the core pipe.

Safety wine lamps are composed of lamp caps, light cores, hole ceramic lights, alcohol into pores, core film tubes, lamp bottles, floating blocks, and inner plugs. They are characterized by the hole of the ceramic lamp core at the opening of the lamp bottle The cylindrical engineering plastic inner plug is located on the neck of the lamp bottle. It has a quiet relationship with the light bottleneck. There is a light core and alcohol pores on the inner plug. The cylindrical project plastic plug, the floating block is a polyethylene foam plastic block, there is a light core hole in the center, the diameter of the inner plug core hole, the diameter of the float core hole is the same as the outer diameter of the core thin film tube. Plug in the inner plug core hole, insert the float core hole in the other end, the outer wall of both ends of the core thin film tube and the inner wall of the core hole in contact with it are glued with glass glue, the core is placed in the core thin film tube, and the lower end is from the float core hole hole. The extension is extended, and the extension part is soaked in alcohol above 10cm. The upper end of the light core extends from the inner plug core hole, and then extends from the hole with the hole of the ceramic lamp.